Dialog

4-Mbit SPI Serial Flash Memory

AT25SF041B
The Adesto AT25SF041B is a serial interface Flash memory device designed for a wide variety of high-volume consumer based on applications in which program code is shadowed from Flash memory into embedded or external RAM for execution.
4-Mbit SPI Serial Flash Memory
Overview: 
The AT25SF041B erase block sizes are optimized to meet the needs of today's code and data shortage applications. This means memory space can be used much more efficiently. Because certain code modules and data storage segments must reside in their own erase regions, the wasted and unused memory space that occurs with large-blocks-erase Flash memory can be reduced greatly. This increased memory space allows additional code routines and data storage segments to be added, while maintaining the same overall device destiny. 

This device also contains three Security Register pages for unique device serialization, system-level Electronic Serial Number (ESN) storage, locked key storage, etc. These pages can be locked individually. 
 
Features:
-Serial Peripheral Interface (SPI) Compatible
  • Supports SPI modes 0 and 3 (1, 1, 1)
  • Supports dual input and dual output operation (1, 1, 2)
  • Supports quad input and quad output operation (1, 1, 4)
  • Supports quad Xip (continuous read mode) operation (1, 4, 4 and 0, 4, 4)
-108 MHz Maximum Operating Frequency
-Single Supply Voltage 
  • 2.7 V - 3.6 V
  • 2.5 V - 3.6 V
-Serial Flash Discoverable Parameters (SFDP, JDES216B) support
-OTP Memory
  • Three Protected Programmable Security Register Pages (Page size: 256 bytes)
  • 64-bits factory programmable UID register
-Hardware Write Protection (WP pin)
-Software Write protection (Programmable non-volatile control registers)
-Program and Erase Suspend and Resume
-Byte programming size: up to 256 bytes
  • Erase Size and Duration
  • Uniform 4-kbyte Block Erase (70 ms typical)
  • Uniform 32-kbyte Block Erase (150 ms typical)
  • Uniform 64-kbyte Block Erase (250 ms typical)
  • Full hip Erase (2 seconds typical)
-Low Power Dissipation 
  • Standby Current (25μA Maximum)
  • Deep Power-Down Current (12μA Maximum)
-Endurance: 100,000 Program and Erase Cycles
-Data Retention: 20 years
-Industrial Temperature Range (-40℃ to  85℃)
-Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
  • 8-lead SOIC
  • 8-pad Ultra-Thin UDFN 
  • Die Wafer Form
  • Other Package Option (contact Adesto)
訂閱電子報,掌握最新科技與產業趨勢 我要訂閱
訂閱電子報
© 2018 EDOM Technology. All Rights Reserved.
本網站使用Cookie為您提供最佳的使用體驗。繼續使用本網站,即表示您同意我們的Cookie Policy
接受