5V, Robust Microcontrollers (MCUs) based on Arm® Cortex®-M0+/M4 Core

Kinetis E Series
5V E series MCUs maintain high-reliability and robustness in harsh electrical noise environments—targeting white goods and industrial applications.
5V, Robust Microcontrollers (MCUs) based on Arm® Cortex®-M0+/M4 Core
The Kinetis® KE02 40 MHz MCU family delivers a next-generation solution with enhanced ESD/EMC performance for cost-sensitive, high-reliability device applications used in high electrical noise environments.
- Offers a cost-effective 32-bit solution featuring low power and high robustness
- Includes a powerful array of analog, communication and timing, and control peripherals with varying flash memory size -and pin count
- Provides a pin-compatible entry point to the Kinetis E series portfolio, as well as pin compatibility with Our 8-bit S08P family

  • Operating characteristics
    • Voltage range: 2.7 to 5.5 V
    • Flash write voltage range: 2.7 to 5.5 V
    • Temperature range (ambient): -40 to 105°C
  • Performance
    • Up to 40 MHz Arm® Cortex®-M0+ core
    • Single cycle 32-bit x 32-bit multiplier
    • Single cycle I/O access port
  • Memories and memory interfaces
    • Up to 64 KB flash
    • Up to 256 B EEPROM
    • Up to 4 KB RAM
  • Clocks
    • Oscillator (OSC) - loop-controlled Pierce oscillator, crystal or ceramic resonator range of 31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz
    • Internal clock source (ICS) - internal FLL with internal or external reference, precision trimming of internal reference allowing 1% deviation across temperature range of 0 °C to 70 °C and 1.5% deviation across temperature range of -40 °C to 105 °C, up to 40 MHz
    • Internal 1 kHz low-power oscillator (LPO)
  • System peripherals
    • Power management module (PMC) with three power modes: Run, Wait, Stop
    • Low-voltage detection (LVD) with reset or interrupt, selectable trip points
    • Watchdog with independent clock source (WDOG)
    • Programmable cyclic redundancy check module (CRC)
    • Serial wire debug interface (SWD)
    • Bit manipulation engine (BME)
  • Security and integrity modules
    • 64-bit unique identification (ID) number per chip
  • Human-machine interface
    • Up to 57 general-purpose input/output (GPIO)
    • Two 8-bit keyboard interrupt modules (KBI)
  • Analog modules
    • One 16-channel 12-bit SAR ADC with internal band gap reference channel, operation in Stop mode, optional hardware trigger (ADC)
    • Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
  • Timers
    • One 6-channel FlexTimer/PWM (FTM)
    • Two 2-channel FlexTimer/PWM (FTM)
    • One 2-channel periodic interrupt timer (PIT)
    • One real-time clock (RTC)

*NXP Authorized Distributor
訂閱電子報,掌握最新科技與產業趨勢 我要訂閱
© 2018 EDOM Technology. All Rights Reserved.
本網站使用Cookie為您提供最佳的使用體驗。繼續使用本網站,即表示您同意我們的Cookie Policy