Monolithic Power Systems

MP3416 - Synchronous Converters

MP3416
Synchronous Converters
MP3416 - Synchronous Converters
OVERVIEW
The MP3416 is a low quiescent current, step-up converter that uses peak-currentcontrol and variable frequency architecture to regulate the output voltage. The MP3416 can work with an input voltage as low as 0.86Vto provide an output voltage from 1.8V to 5.5V.

The MP3416 works in peak-current-control modeand provides good transient response. The integrated P-channel synchronous rectifier improves efficiency and eliminates the need for an external Schottky diode.

In light-load condition, the peak current declines to about 350mA, and the device enters pulse-skip mode to save power loss. When the MP3416 shuts down, the output is disconnected from the input, allowing the output to draw less than 0.65µA in shutdown mode.

The MP3416 is available in 8-pin TSOT23 and 8-pin QFN (1.5mmx2.0mm) packages. 



FEATURES
  • Input Voltage Range: 0.86V to 5.5V
  • Start-Up Voltage Range:1.25V to 5.5V
  • Output Voltage Range: 1.8V to 5.5V
  • 9.5μA Quiescent Current
  • <650nA Shutdown Current
  • Up to 80% Efficiency at 100μA-200μA Light-Load Condition
  • Output Disconnect in Shutdown
  • DownMode When VIN> VOUT
  • Adjustable Low Battery Detection
  • Internal Synchronous Rectifier
  • Over-Temperature Protection(OTP) withThermal Shutdown at 155°C
  • Available in TSOT23-8 and QFN-8 (1.5mmx2.0mm) Packages

*MPS Authorized Distributor
banner_ins
訂閱電子報,掌握最新科技與產業趨勢
訂閱電子報,掌握最新科技與產業趨勢
我要訂閱

數字驗證

請由小到大,依序點擊數字

洽詢車

你的洽詢車總計 0 件產品

    搜尋

    偵測到您已關閉Cookie,為提供最佳體驗,建議您使用Cookie瀏覽本網站以便使用本站各項功能

    本網站使用Cookie為您提供最佳的使用體驗。繼續使用本網站,即表示您同意我們的Cookie Policy