Monolithic Power Systems

Synchronous Converters


MP3416
Synchronous Converters
Synchronous Converters
OVERVIEW
The MP3416 is a low quiescent current, step-up converter that uses peak-currentcontrol and variable frequency architecture to regulate the output voltage. The MP3416 can work with an input voltage as low as 0.86Vto provide an output voltage from 1.8V to 5.5V.

The MP3416 works in peak-current-control modeand provides good transient response. The integrated P-channel synchronous rectifier improves efficiency and eliminates the need for an external Schottky diode.

In light-load condition, the peak current declines to about 350mA, and the device enters pulse-skip mode to save power loss. When the MP3416 shuts down, the output is disconnected from the input, allowing the output to draw less than 0.65µA in shutdown mode.

The MP3416 is available in 8-pin TSOT23 and 8-pin QFN (1.5mmx2.0mm) packages. 



FEATURES
  • Input Voltage Range: 0.86V to 5.5V
  • Start-Up Voltage Range:1.25V to 5.5V
  • Output Voltage Range: 1.8V to 5.5V
  • 9.5μA Quiescent Current
  • <650nA Shutdown Current
  • Up to 80% Efficiency at 100μA-200μA Light-Load Condition
  • Output Disconnect in Shutdown
  • DownMode When VIN> VOUT
  • Adjustable Low Battery Detection
  • Internal Synchronous Rectifier
  • Over-Temperature Protection(OTP) withThermal Shutdown at 155°C
  • Available in TSOT23-8 and QFN-8 (1.5mmx2.0mm) Packages

*MPS Authorized Distributor
Subscribe to EDOM TECH Newsletter Subscribe!
Subscribe
to Newsletter
© 2018 EDOM Technology. All Rights Reserved.
This website uses Cookie to provide you with the best experience. By continuing to use our website, you consent to our Cookie Policy.
ACCEPT