Subscribe to EDOM TECH Newsletter
Qorvo
ACT2801 - Backup Battery Pack Manager
ACT2801
ACT2801 from ACT28xx Family of high-performance, low-profile ICs enables Industry’s smallest size solutions for backup battery pack and standalone battery chargers.
Qorvo's ACT2801 is a high-performance, low-profile battery management IC that enables the smallest size solutions for backup battery packs and standalone battery chargers. Each solution can be implemented with a single ACT2801 IC.
ACT2801 can enable 5 V / 1 A power bank solutions and can support input current of up to 1.5 A and an output current of up to 1.5 A.
The product integrates all the functions that a backup battery pack needs, including switching charger, boost converter and LED indication. The product also includes an input to obtain user feedback (for example, via a push button), to support various user-interface functions such as turning charging on/off and query charging status. The IC supports LED indication to display charging level on 4 LEDs.
ACT2801 operates at 2.2 MHz / 1.1 MHz for switching charger and 1.1 MHz / 0.55 MHz for boost converter allowing tiny external inductors and capacitors. ACT2801 provides a direct power path from input to output with a programmable current limit while providing power to the switching charger. Output has higher priority than the battery charger if the programmed input current limit is reached.
The product charges the battery with the full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110 °C with charge current foldback. The product's boost converter steps battery voltage up to 5 V. The boost converter features high efficiency, constant current regulation, short circuit protection and over-voltage protection.
ACT2801 provides 3.5 mA constant current to drive 4 LEDs to indicate battery level and charge status. Battery impedance is compensated for battery level indication.
●High Charge & Discharge Efficiency, 95% Boost Efficiency (Vbat = 4.1V)
●<10μA Low Battery Leakage Current in Hi-Z Mode during Storage
●Programmable Input Current Limit to up to 1.5A
●Programmable Constant Output Current in Boost Mode to up to 5V/1.5A
●No Load Shutdown and Push Button Turn-on
●Sophisticated Battery Protection for Over Current (OCP), Over Voltage (OVP), Over Temperature ●(OTP) and Short Circuit Protections (SCP). Battery Disconnection at Output Short
*Qorvo Authorized Distributor
ACT2801 can enable 5 V / 1 A power bank solutions and can support input current of up to 1.5 A and an output current of up to 1.5 A.
The product integrates all the functions that a backup battery pack needs, including switching charger, boost converter and LED indication. The product also includes an input to obtain user feedback (for example, via a push button), to support various user-interface functions such as turning charging on/off and query charging status. The IC supports LED indication to display charging level on 4 LEDs.
ACT2801 operates at 2.2 MHz / 1.1 MHz for switching charger and 1.1 MHz / 0.55 MHz for boost converter allowing tiny external inductors and capacitors. ACT2801 provides a direct power path from input to output with a programmable current limit while providing power to the switching charger. Output has higher priority than the battery charger if the programmed input current limit is reached.
The product charges the battery with the full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110 °C with charge current foldback. The product's boost converter steps battery voltage up to 5 V. The boost converter features high efficiency, constant current regulation, short circuit protection and over-voltage protection.
ACT2801 provides 3.5 mA constant current to drive 4 LEDs to indicate battery level and charge status. Battery impedance is compensated for battery level indication.
Features:
●Dedicated Single Chip Solution for Mobile Power with Minimal Component Count●High Charge & Discharge Efficiency, 95% Boost Efficiency (Vbat = 4.1V)
●<10μA Low Battery Leakage Current in Hi-Z Mode during Storage
●Programmable Input Current Limit to up to 1.5A
●Programmable Constant Output Current in Boost Mode to up to 5V/1.5A
●No Load Shutdown and Push Button Turn-on
●Sophisticated Battery Protection for Over Current (OCP), Over Voltage (OVP), Over Temperature ●(OTP) and Short Circuit Protections (SCP). Battery Disconnection at Output Short
*Qorvo Authorized Distributor
Getting Started with Bluetooth Mesh Development
No matter how tough your Bluetooth® mesh application is, Silicon Labs' Blue Gecko Bluetooth Wireless Starter Kit is your solution. It provides you with Bluetooth 5 and Bluetooth mesh connectivity with the on-board EFR32BG13 SoC as has debug capabilities over USB and Ethernet providing an uncompromised developer experience.
Bluetooth Low Energy Modules
Quickly introduce Bluetooth® Low Energy (LE) connectivity into devices with certified modules and software from Silicon Labs. Select from a range of modules including the world's smallest Bluetooth System in Package (SiP) module to add Bluetooth LE or Bluetooth mesh, and functionality to your designs.
