Subscribe to EDOM TECH Newsletter
TDK InvenSense
IIM-42652 | 6-Axis SmartIndustrial™ MotionTracking device
IIM-42652
Compact 6-Axis SmartIndustrial™ MotionTracking MEMS Device for Industrial Applications
Overview
The IIM-42652 is a 6-axis SmartIndustrial™ MotionTracking device that supports an extended operating temperature range.
The IIM-42652 combines a 3-axis gyroscope and a 3-axis accelerometer in a small 2.5 × 3 × 0.91 mm (14-pin LGA) package. It also features a 2K-byte FIFO that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode.
The host interface can be configured to support I3C℠ slave, I²C slave, or SPI slave modes. The I3C℠ interface supports speeds up to 12.5 MHz (data rates up to 12.5 Mbps in SDR mode, 25 Mbps in DDR mode), the I²C interface supports speeds up to 1 MHz, and the SPI interface supports speeds up to 24 MHz.
The device features an operating voltage range from 3.6 V down to 1.71 V.
IIM-42652 Features & Benefits
- Digital-output X-, Y-, and Z-axis gyroscope with programmable full-scale range of ±15.625, ±31.25, ±62.5, ±125, ±250, ±500, ±1000, and ±2000 degrees/sec
- Digital-output X-, Y-, and Z-axis accelerometer with programmable full-scale range of ±2g, ±4g, ±8g and±16g
- User-programmable interrupts
- I3C℠ / I²C / SPI slave host interfaceDigital-output temperature sensor
- Small and thin package: 2.5 × 3 × 0.91 mm (14-pin LGA)
- 20,000g shock tolerant
- MEMS structure hermetically sealed and bonded at wafer level
- RoHS and Green compliant
Applications
- Navigation
- Orientation measurement
- Tilt sensing
- Platform stabilization
- Robotics
*TDK Invensense Authorized Distributor
